Fuel Feed Pipe Replacement - Fuel Junction Block to Fuel
Injection Pump (1.7L Diesel LPL and LPV)
Removal Procedure
Warning: Refer to
Gasoline/Gasoline Vapors Warning .
|
Warning:
Always wear safety goggles when working with fuel
in order to protect the eyes from fuel splash. |
|
Caution: Clean all fuel pipe and hose connections and surrounding
areas before disassembling to avoid possible contamination of the
fuel system. Spray the fuel pump module cam-lock ring tang with
penetrating oil prior to attempting removal. |
3. |
Remove the fuel injection fuel
feed pipe bracket bolt (2). |
4. |
Remove the 2 fuel injection
fuel feed pipe connecting nuts. |
|
Note: Plug the fuel
rail and the fuel injection pump in order to prevent
contamination.
|
5. |
Remove the fuel injection fuel
feed pipe (1). |
Installation Procedure
1. |
Install the fuel injection
fuel feed pipe (1). |
2. |
Tighten the fuel feed pipe
connecting nuts to 25 N·m (18 lb ft)
. |
3. |
Install the fuel feed pipe
bracket bolt (2) and tighten to 12 N·m (106 lb
in) . |
|