Glow Plug Replacement (1.7L Diesel LPL and LPV)
Special Tools
EN-48558 Glow Plug Socket Remover
For equivalent regional tools, refer to
Special Tools .
Removal Procedure
3. |
Clean around of each glow
plug. |
|
Caution: Use care when disconnecting the glow plug electrical
connector. Use of excessive force may damage the electrical
connector. |
4. |
Disconnect the 4 glow plug
wiring harness plugs (1), using the EN-48558 socket
remover . |
|
Note: The graphic
shows the engine without the fuel injection components to simplify
the illustration.
|
5. |
Remove the 4 glow plugs
(1). |
Installation Procedure
|
Note: The graphic
shows the engine without the fuel injection components to simplify
the illustration.
|
1. |
Install the 4 glow plugs (1)
and tighten to 14 N·m (124 lb in) .
|
2. |
Connect the 4 glow plug wiring
harness plugs (1). |
|