Callout
|
Component Name
|
|
Warning:
Gasoline or gasoline vapors are highly flammable.
A fire could occur if an ignition source is present. Never drain or
store gasoline or diesel fuel in an open container, due to the
possibility of fire or explosion. Have a dry chemical (Class B)
fire extinguisher nearby. |
Warning: Refer to
Safety Goggles and Fuel Warning
.
Preliminary Procedures
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle .
|
1
|
Fuel Filter Assembly Retainer
Procedure
|
1. |
Connect a rubber hose to the retainer pipe to
minimize the fuel spill. |
|
2. |
Release the fuel filter assembly retainer with a
suitable screw driver. |
|
3. |
Drain the fuel filter. |
|
2
|
Fuel Filter Assembly Cap
|
1. |
Release the fuel filter assembly cap using a
spanner. |
|
2. |
Remove the fuel filter assembly cap. |
Caution: Refer to
Fastener Caution .
Tighten
25 N·m (19 lb ft)
|
3
|
Fuel Filter
|
Caution: Do
not use a screwdriver or punch to remove the seal. Using a
screwdriver or punch to remove the seal may damage the aluminum
housing sealing surface. |
Procedure
Install New fuel filter assembly cap gasket.
|