Engine Coolant Fan Replacement (2.0L Diesel LBS and LBX)
Removal Procedure
2. |
Disconnect the engine coolant
fan resistor wiring harness plug (1). |
3. |
Unclip all wiring harness
retainer clips and remove the wiring harness (2). |
4. |
Remove the engine coolant fan
shroud (1). |
5. |
Remove the engine coolant fan
resistor (1) by unclipping the retainer clip (2). |
6. |
Unclip the engine coolant fan
resistor wiring harness (arrows). |
7. |
Remove the 3 engine coolant
fan motor bolts (3) from the engine coolant fan. |
8. |
Remove the engine coolant
fan. |
Installation Procedure
1. |
Install the engine coolant
fan. |
2. |
Install the 3 engine coolant
fan motor bolts (3) and tighten to 4 N·m (35 lb
in) . |
3. |
Clip in the engine coolant fan
resistor wiring harness (arrows). |
4. |
Install the engine coolant fan
resistor (1) by clipping the retainer clip (2). |
5. |
Install the engine coolant fan
shroud (1). |
6. |
Install the wiring harness (2)
and clip in all retainer clips. |
7. |
Connect the engine coolant fan
resistor wiring harness plug (1). |
|