vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine Mount Bracket Replacement - Right Side > < Valve Stem Oil Seal and Valve Spring Replacement

Engine Mount Replacement - Right Side

Removal Procedure

1. Open the hood.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .

           2191340



3. Install an engine lifter (1) to the right engine lift bracket and apply tension to the engine lifter chain in order to support the engine.

           2191341



4. Remove and DISCARD the 3 engine mount to engine mount bracket bolts (3) and the 3 washers (4).
5. Remove the 2 engine mount to body bolts (2) and the engine mount nut (1).
6. Remove the engine mount (5).

Installation Procedure


           2191341



1. Install the engine mount (5).
2. Install the 2 engine mount to body bolts (2).
3. Install the engine mount nut (1).
4. Install the 3 NEW engine mount to engine mount bracket bolts (3) and the 3 washers (4).

Caution: Refer to Fastener Caution .

5. Tighten the 2 engine mount to body bolts (2) and the engine mount nut (1) to 62 N·m (46 lb ft) .
6. Tighten the 3 engine mount to engine mount bracket bolts (3) to 50 N·m (37 lb ft) + 60-70° .
7. Remove the engine lifter from right engine lift bracket.
8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
9. Close the hood.

Engine Mount Bracket Replacement - Right Side > < Valve Stem Oil Seal and Valve Spring Replacement