Glow Plug Installation
Special Tools
• |
EN-6104
Remover/Installer Glow Plugs 12 mm |
• |
EN-48390
Remover/Installer Glow Plugs 9 mm |
For equivalent regional tools, refer to
Special Tools .
1. |
Install the 4 glow plugs
(1). |
2. |
Install the 2 glow plugs (1)
without pressure sensor using the EN-48390
installer 9 mm (0.354 in) and tighten to 8
N·m (71 lb in) . |
3. |
Install the 2 glow plugs (1)
with pressure sensor using the EN-6104 installer
12 mm (0.0472 in) and tighten to 8
N·m (71 lb in) . |
|