Control Solenoid Valve and Transmission Control Module Assembly
Inspection
1. |
Inspect the control solenoid
valve assembly connectors and pins (1, 2, 4, 6) for the following
conditions: |
2. |
Ensure no metallic debris is
inside the connectors near the terminal pins. |
3. |
Inspect the control solenoid
valve assembly solenoid leads (3) for contamination or metallic
debris. |
4. |
Inspect the 2 control solenoid
valve assembly filter plate retaining tabs (5) for cracks and
ensure proper tension when filter plate is attached. |
|