Checks
|
Causes
|
2-6 Clutch Assembly
|
• |
Inspect for damaged or worn 2-6 Clutch Plates
(540-542). |
• |
Inspect for damaged, worn, broken, improper
surface finish or sheared splines on the Low-Reverse Clutch
Assembly (543). |
• |
Inspect for damaged or broken 2-6 Clutch Piston
(535) and piston seals damaged, worn or delaminating. |
• |
Inspect for broken or binding 2-6 clutch Piston
Return Spring (536). |
|
Reaction Carrier Assembly (567)
|
• |
Inspect for stripped or sheared splines on the
Input Ring Gear. |
• |
Inspect for disengaged or broken Input Ring Gear
Retainer. |
|
Reaction Sun Gear Assembly (566)
|
• |
Inspect for damaged or broken Reaction Sun Gear
Assembly hub. |
• |
Inspect for damaged or broken sun gear weld. |
• |
Inspect for loose or worn Reaction Sun Gear
Assembly bushing. |
|
Case Assembly (50)
|
• |
Inspect for stripped or sheared splines. |
• |
Inspect for broken or disengaged 2-6 Clutch Piston
Return Spring Retainer (537). |
• |
Inspect for damaged, worn, or improper surface
finish in the piston bore. |
|
Output Carrier Assembly (574)
|
Inspect for reaction ring gear damage or missing ring gear snap
ring.
|
Control Valve Body Assembly
|
Inspect 2-6 Clutch Regulator Valve (419) for debris and
stickyness.
|
Control Solenoid (w/Body and TCM) Valve Assembly
|
Check 2-6 PC Solenoid 4 for proper operation. Refer to
Control Solenoid Valve and Transmission Control Module Assembly
Solenoid Performance Test .
|