Callout
|
Component Name
|
|
Caution: After cleaning the transmission components, allow to air
dry. Do not use cloth or paper towels in order to dry any
transmission components. Lint from the towels can cause component
failure. |
|
Caution: Do
not reuse cleaning solvents. Previously used solvents may deposit
sediment which may damage the component. |
Preliminary Procedures
|
1. |
Thoroughly clean the housing with clean
solvent. |
|
2. |
Inspect the piston bores and retainer ring grooves
for wear, damage or porosity. |
|
1
|
1-2-3-4 Clutch Spring Retainer Groove
|
2
|
1-2-3-4 Clutch Piston Bore
|
3
|
Low and Reverse Clutch Spring Retainer Groove
|
4
|
Low and Reverse Clutch Piston Bore
|
5
|
Clutch Oil Passages
|
6
|
Air Bleed Passages
|
