Automatic Transmission Range Selector Lever Replacement
Removal Procedure
1. |
Set the park brake and chock
the wheels. |
3. |
Disconnect the transmission
range selector lever cable terminal (1) from the transmission
manual shift lever pin. |
4. |
Press the locking tabs inward
in order to release the transmission range selector lever cable (2)
from the cable bracket. |
5. |
Remove the transmission range
selector lever nut (1) and washer. |
6. |
Remove the transmission range
selector lever (2). |
Installation Procedure
1. |
Install the transmission range
selector lever (2). |
3. |
Install the transmission range
selector lever nut (1) and tighten to 22 N·m (16 lb
ft) . |
4. |
Install the transmission range
selector lever cable (2) to the cable bracket. |
5. |
Connect the transmission range
selector lever cable terminal (1) to the transmission manual shift
lever pin. |
|