Transmission Mount Replacement - Left Side
Removal Procedure
2. |
Install an engine lifter (1)
to the left engine lift brackets (2) and apply tension to the
engine lifter chains in order to support the engine. |
3. |
Remove and DISCARD 3
transmission mount bolts (1). |
4. |
Remove 2 transmission mount
bolts (2) and transmission mount nut (1). |
5. |
Remove transmission mount
(1). |
Installation Procedure
1. |
Install transmission mount
(1). |
2. |
Install 2 transmission mount
bolts (2) and tighten to 62 N·m (46 lb ft)
. |
3. |
Install transmission mount nut
(1) and tighten to 62 N·m (46 lb ft)
. |
4. |
Install 3 NEW transmission
mount bolts (1) and tighten to 50 N·m (37 lb ft) +
60° - 75° . |
5. |
Remove the engine lifter from
left engine lift brackets. |
|