Vauxhall Workshop Service and Repair Manuals

SPECIAL SERVICE TOOLS

KM-125              Spring Remover

To remove and install right hinge spring (luggage compartment lid)

KM-317-A          Remover

To remove door handle and window crank

KM-347              Installer

To press in rubber seal lips when installing window/screen glass

KM-400-A          Strip Installer

To draw in plastic beading on windscreen and tailgate screen for painting operations.

KM-475-A          Trim Remover

To remove door inner trim panel

KM-569-A          Clip Remover

To remove clip on inner trim panels, remove head rest sleeve

MKM-589    Wire Cutter

To remove cemented screens

MKM-590-A                 Thermo-Knife

To remove cemented screens

consisting of:

MKM-590-1, Heating Unit (220 volts)

MKM-590-2, Cutting Handle (with screwdriver) MKM-590-3, Knife (angle 18 mm)

MKM-590-4, Knife (angle 33 mm)

MKM-590-5, Scraper (18 mm wide)

MKM-590-6, Knife (angle 55 mm)

MKM-590-7, Knife (angle 60 mm)

MKM-590-8, Knife (angle 80 mm)

MKM-590-9, Knife (angle 18 mm; base 46 mm) MKM-590-10, Knife (angle 33 mm; base 46 mm) MKM-590-11, Knife (angle 40 mm)

Note:                  All tools in the MKM-590-A series can be individually supplied upon request.

To avoid confusion between knives, the end digit of the MKM-590 identification number is embossed on base of knife.

MKM-591           Spanner Band

(Pair of spanner bands with elastic supports for holding screen in position during installation)

MKM-592           Air-Powered Gun

(To apply sealing compounds and cement out of standard cartridges, approx. 300 ml)

KM-593              Remover/Installer

(Operation unit of glass/sliding sun roof to roof frame)

MKM-641           Suction Holder

To hold screen during removal/installation