Install
Bolt seat to vehicle floor
(use new bolts).
Tighten according to
instructions (seat length adjustment must catch evenly on both sides - see
illus. C 0280).
1. Bolt rear of seat rail to mounting (positions
2 and 4) without play but still adjustable.
2. Tighten rails in position 1 and then in
position 3 to 20 Nm/14.75 lbf. ft.
3. Tighten rails in position 2 and then in
position 4 to 20 Nm/14.75 lbf. ft.
|