vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Diagnostic Information and Procedures > < Bumper Guard with Spray Nozzle, Replace

Object Number: 2375001  Size: DEFAULT

 

 

Wiring Harness - Central Door Locking System, Electric Window Operation and

Electric Mirror Adjustment, Replace.

 

Remove

 

Disconnect ground cable from battery.

Remove both front seats.

Remove foot well side covering at left and right lower A pillars.

Remove left hand sill panel covering.

Remove front and rear centre console. Unscrew ground cable from underbody panel.

Disconnect wiring harness at plug connections from:

-   Door wiring harnesses

-   Cable for switch for electric mirror adjustment

-   Cable for switch for electric window operation

-   Rear wiring harness (at central plug connection)

Disconnect wiring harness from:

-   Relay for mirror heating

-   Control unit for central door locking system

Remove luggage compartment covering and rear quarter inner trim panel. Disconnect wiring harness at plug connection from tail gate wiring harness.

Pull wiring harness with rubber grommets (A pillar) into rear of passenger compartment.

 

Install

Analogously in reverse order.

 

 

 

Diagnostic Information and Procedures > < Bumper Guard with Spray Nozzle, Replace