Coolant Pipe, Replace (Z 17 DTH, without AC,
LHD)
Remove
1. |
Remove exhaust manifold with turbocharger and pre-catalytic
converter
|
3. |
Remove coolant pipe
• |
Pull coolant hose from coolant pipe flange in direction of
arrow
|
|
|
|
Install
8. |
Install exhaust manifold with turbocharger and pre-catalytic
converter
|
10. |
Top up engine oil
• |
Observe specified engine oil quantity
|
• |
Start engine and allow to run until oil pressure telltale
extinguishes.
|
• |
Check engine oil level, if necessary correct.
|
|
|