Thermostat, Remove and Install (Z 17 DTH, with AC,
LHD)
Remove
2. |
Drain coolant
• |
Place collecting basin underneath.
|
• |
Open coolant drain bolt
|
|
|
|
4. |
Disconnect upper radiator hose (1)
• |
From thermostat housing cover
|
|
5. |
Detach wiring harness bracket (3)
• |
Oil pressure switch, coolant temperature sensor
|
|
6. |
Remove thermostat housing cover (2)
|
7. |
Clean sealing surfaces
|
|
|
Install
8. |
Attach thermostat housing cover
• |
Tighten 2 bolts 23.5 Nm
|
|
9. |
Attach wiring harness bracket
• |
Oil pressure switch, coolant temperature sensor
|
|
10. |
Clip in coolant hose.
|
11. |
Connect upper radiator hose
• |
To thermostat housing cover
|
|
12. |
Close coolant drain bolt
|
|