vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Toothed Belt Drive Gear - Crankshaft Sprocket, Replace > < Front Crankshaft Seal Ring, Replace (Z 17 DTH, with AC, LHD)

Corsa C

Crankshaft Sensor, Replace (Z 17 DTH, With Air Conditioning, LHD)

  Remove

1.   Open bonnet
2.   Raise vehicle
3.   Remove crankshaft sensor (1)
•   Disconnect wiring harness plug
•   Remove bolt (2)
Object Number: 2411113 Size: DEFAULT


  Install

4.   Install crankshaft sensor
•   Replace seal ring
•   Tighten bolt 9.8 Nm
•   Connect wiring harness plug
5.   Raise vehicle
6.   Close bonnet

Toothed Belt Drive Gear - Crankshaft Sprocket, Replace > < Front Crankshaft Seal Ring, Replace (Z 17 DTH, with AC, LHD)