Replacing atmospheric pressure sensor
Remove
2. |
Disconnect battery
• |
Detach ground clamp from ground terminal
|
|
3. |
Raise vehicle all the way
|
4. |
Remove atmospheric pressure sensor (1)
• |
Disconnect wiring harness plug
|
• |
Unclip atmospheric pressure sensor from bracket in direction of
arrow
|
|
|
|
Install
5. |
Install atmospheric pressure sensor
• |
Clip sensor into bracket
|
• |
Connect wiring harness plug
|
|
6. |
Lower vehicle all the way
|
7. |
Connect battery
• |
Attach ground clamp to ground terminal
|
|
8. |
Program volatile memory
|
|