vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Fuel filler flap, remove and install > < Replace wind protection panelling

Corsa D

Replace bulkhead closing part

  Remove

1.   Detach wind protection panelling LUREF_1.gif
2.   Remove support strut, bulkhead closing part centre
•   Unscrew 2x closure
Note:   Some vehicles of MY 2007 have connections with body-bound rivets!
•   Remove support strut
Object Number: 10679785 Size: DEFAULT


Object Number: 10678722 Size: DEFAULT

3.   Remove bulkhead closing part
•   Unscrew 6x bolts
•   Remove bulkhead closing parts

  Install

4.   Install bulkhead closing part
•   Insert bulkhead closing part
•   Tighten 6x bolts
5.   Install bulkhead closing part bracket, centre
•   Insert holder
•   Screw in 2x closure
6.   Install wind protection panelling LUREF_1.gif

Fuel filler flap, remove and install > < Replace wind protection panelling