vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Sheet Metal Parts (cement and seal) > < Replace internal protective panelling of wing

Corsa D

Replace rear wheel housing protective panelling

  Remove

Object Number: 10678717 Size: DEFAULT

1.   Release wheel housing protective panelling
•   Unscrew 2x bolts (1)
2.   Remove wheel housing protective panelling
•   Unscrew 5x nut (arrows)
•   Remove protective panelling

  Install

Important:   When replacing a stud bolt, use rivet bolt 90 569 818/1404966. The required attachment for the riveting tool is available from Böllhoff (Z305 part no.:2351 015 4000).
3.   Install wheel housing protective panelling
•   Insert protective panelling
•   Tighten 5x nuts
4.   Fasten wheel housing protective panelling
•   Tighten 2x bolts

Sheet Metal Parts (cement and seal) > < Replace internal protective panelling of wing