Lock Cylinder, Remove and Install or Replace
Remove
1. |
Remove front door panel
• |
Prise off panel (1) with a plastic wedge
|
|
|
|
|
2. |
Remove fixed handle part on front door with lock cylinder
• |
Pull moving handle part (I) to the outside and hold
|
• |
Turn screw (II) to left to the perceptible stop
Note: Moving handle
part must now be fixed in the pulled position
|
• |
Remove fixed handle part with lock cylinder (III)
|
|
|
3. |
Detach lock cylinder cover
|
|
|
Install
4. |
Install lock cylinder cover
• |
Clip cover into position
|
|
5. |
Fit fixed handle part on front door with lock cylinder
• |
Insert fixed handle part with lock cylinder
|
• |
Turn screw to right to the perceptible stop
Note: Hold moving
handle part under tension during the screw process
|
|
6. |
Attach front door panel
|
|