Rear door outside handle, remove and install
Remove
1. |
Detach rear door panel
• |
Prise off panel with a plastic wedge
|
|
|
|
|
2. |
Remove fixed handle part, rear door
• |
Pull moving handle part (I) to the outside and hold
|
• |
Turn screw (II) to left to the perceptible stop
Note: Moving handle
part must now be fixed in the pulled position
|
• |
Remove fixed handle part with lock cylinder (IV)
|
|
|
3. |
Detach door handle
• |
Pull moving handle part (III) towards the back
|
|
Install
4. |
Attach door handle
• |
Insert moving handle part in door panel
|
|
5. |
Install fixed handle part, rear door
• |
Insert fixed handle part
|
• |
Turn screw to right to the perceptible stop
Note: Hold moving
handle part under tension during the screw process
|
|
6. |
Attach rear door panel
|
|