|
Sunroof Weatherstrip - Centre, Replace
 Remove
| 1. |
Remove glass cover
Note: Place glass cover
on a suitable surface
|
|
| 2. |
Detach weatherstrip (1)
|
|
| 3. |
Clean surface to be bonded
Note: Do not use
detergents containing solvents.
| • |
Remove adhesive residues with a plastic scraper
|
|
Install
| 4. |
Attach rubber seal
| • |
Affix the weatherstrip
Note: Adhesive face of
the seal must be centred on the rear edge of the roof opening.
Note: Vent holes of the
seal must face inwards to the roof opening.
|
|
|
