Replace front seat pad - L08
Remove
1. |
Remove front seat
Note: Observe waiting
time for airbag deactivation, 1 min.
|
2. |
Remove head restraint
• |
Release head restraint in direction of arrow, and withdraw
upwards
|
|
|
|
3. |
Detach adjustment handle (1) on front seat backrest
• |
Unclip adjustment handle panel (2) with suitable tool
|
• |
Unclip front seat backrest adjustment handle
|
|
|
|
4. |
Detach height adjuster panel (1)
• |
Unclip panel with a suitable tool
|
|
5. |
Detach height adjuster (2)
• |
Unscrew bolt (3) and remove lever
|
|
|
|
7. |
Uncover airbag cable harness
• |
Expose wiring harness from seat backrest
|
|
8. |
Remove front seat backrest
• |
Detach 2x tension strap
|
• |
Release and unclip Bowden cable (2)
|
|
|
|
|
9. |
Detach upholstery covering all the way round
• |
Undo 6x clips (1, 2)
Note: Clips cannot be
removed without damage, and must be replaced.
|
|
|
10. |
Remove upholstery covering
• |
Detach upholstery covering from seat mount all the way
round
|
• |
Detach 11x upholstery clamps
|
• |
Remove upholstery covering
|
|
11. |
Replace upholstery pad
|
|
|
Install
13. |
Attach upholstery covering
• |
Attach 11x upholstery clamps
|
|
14. |
Fasten upholstery covering all round
|
15. |
Install front seat backrest
• |
Attach and clip in Bowden cable
|
• |
Attach 2x tension strap
|
|
16. |
Lay airbag cable harness
• |
Lay wiring harness on seat backrest
|
|
18. |
Fit height adjuster lever
|
19. |
Fit height adjuster lever panel
|
20. |
Install head restraint
|
21. |
Install adjusting wheel for front seat backrest
|
22. |
Attach adjuster wheel panel
|
|