vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace upholstery covering in front seat backrest - OPC > < Replace pad in front seat backrest - OPC

Corsa D

Replace front seat upholstery covering - OPC

  Remove

1.   Remove front seat
2.   Detach adjustment handle (1) on front seat backrest
•   Unclip adjustment handle panel (2) with suitable tool
•   Unclip front seat backrest adjustment handle
Object Number: 10678661 Size: DEFAULT


3.   Detach height adjuster panel (1)
•   Unclip panel with a suitable tool
4.   Detach height adjuster (2)
•   Unscrew bolt (3) and remove lever
Object Number: 10679419 Size: DEFAULT


Object Number: 10679484 Size: DEFAULT

5.   Detach outside panelling (1)
•   Unscrew 2x bolt (2)
•   Unclip panelling

6.   Detach inside panelling
•   Unscrew bolt (arrow)
•   Unclip panelling (1)
Object Number: 10679424 Size: DEFAULT


7.   Detach front seat backrest
•   Unscrew 4x bolt (1, 2)
•   Release and unclip Bowden cable (3)
Object Number: 10680708 Size: DEFAULT


8.   Detach upholstery covering on front seat backrest all round
9.   Detach front seat backrest panelling (2) left
•   Fold up pad (1)
•   Unscrew 11x bolt (arrows)
•   Release clip (3)
•   Remove panelling
Object Number: 10680709 Size: DEFAULT


10.   Clean thread
•   Recut 11x threads
11.   Detach side airbag wiring harness (1) from front seat backrest
•   Release and disconnect wiring harness plug (2)
•   Detach 3x cable tie (arrows)
Object Number: 10680710 Size: DEFAULT


12.   Lay front seat backrest aside
Object Number: 10679986 Size: DEFAULT

13.   Detach upholstery covering front seat all round
•   Undo 6x clips (1, 2)
•   Remove from guides

14.   Detach upholstery covering from pad (1)
•   Unclip 4x from hook (2) seat shell
•   Separate Velcro closure (2)
•   Unclip 6x (arrows)
Object Number: 10680712 Size: DEFAULT


  Install

15.   Insert pad
16.   Attach upholstery covering to pad
•   Clip in 4x hooks seat shell
•   Clip in 6x clips
•   Connect Velcro closure
17.   Fasten upholstery covering all round
•   Insert upholstery covering in guides
•   Clip in 6x clips
18.   Attach side airbag wiring harness to front seat backrest
•   Attach 3x cable ties
•   Connect and latch wiring harness plug
19.   Attach front seat backrest panelling left
•   Clip in panelling
•   Tighten 11x bolt
Note:   Screws must be inserted with locking compound.
20.   Fasten upholstery covering all round
21.   Attach front seat backrest to front seat
•   Tighten 4x bolt
•   Attach and clip in Bowden cable
22.   Attach panelling inside
•   Clip in panelling
•   Tighten the bolt
23.   Attach outside panelling
•   Clip in panelling
•   Tighten 2x bolts
24.   Install height adjuster
•   Insert lever
•   Tighten the bolt
25.   Install height adjuster panel
•   Clip in panel
26.   Attach adjustment handle on front seat backrest
•   Push on adjustment handle
•   Clip in adjustment handle panel
27.   Install front seat

Replace upholstery covering in front seat backrest - OPC > < Replace pad in front seat backrest - OPC