Replace moulded headlining - L68
Remove
|
1. |
Remove A-pillar panelling (2) - both sides
• |
Remove A-pillar panelling from guide
|
|
|
2. |
Detach lower B-pillar panelling
• |
Remove from upper B-pillar panelling
|
|
|
|
3. |
Detach upper B-pillar panelling (1) - both sides
• |
Remove upper B-pillar panelling from guide (2)
|
• |
Unclip upper B-pillar panelling (3)
|
|
4. |
Leave upper B-pillar panelling hanging from belt (5) - both
sides
Note: The belt height
adjuster panel (4) need not be removed.
|
|
|
5. |
Detach C-pillar panelling (1) - both sides
• |
Unclip airbag cover (2)
|
• |
Unclip 2x and remove from guide
|
• |
Leave C-pillar panelling hanging from belt (3)
|
|
|
|
|
6. |
Remove spectacles holder in moulded headlining
|
|
|
7. |
Remove handles in moulded headlining
|
|
8. |
Detach sun visor - both sides
• |
Unclip sun visor from support and remove
|
|
|
|
9. |
Remove sun visor support - both sides
|
|
|
10. |
Remove interior light
|
|
11. |
Lower moulded headlining
• |
Separate 2x Velcro closures in rear area
|
• |
Disconnect wiring harness plug.
|
|
12. |
Remove moulded headlining through the open tailgate
Note: A second mechanic
is required.
Note: When removing,
ensure that the moulded headlining is not damaged.
|
|
Install
13. |
Insert moulded headlining
Note: A second mechanic
is required.
|
14. |
Position moulded headlining
• |
Connect wiring harness plug
|
• |
Connect 2x Velcro fastenings
|
• |
Insert moulded headlining below door rubber strips
|
|
15. |
Install interior light
|
16. |
Attach sun visor - both sides
• |
Clip sun visor into support
|
|
17. |
Attach sun visor - both sides
• |
Clip sun visor into support
|
|
18. |
Install handles in moulded headlining
|
19. |
Install spectacles holder in moulded headlining
|
20. |
Attach C-pillar panelling - both sides
Note: Ensure tailgate
rubber strip sits correctly
• |
Insert in guide and clip in 2x
|
|
21. |
Install upper B-pillar panelling - both sides
• |
Clip in upper B-pillar panelling
|
• |
Insert upper B-pillar panelling in guide
Note: Ensure door
rubber strip sits correctly
|
|
22. |
Attach lower B-pillar panelling
• |
Insert in upper B-pillar panelling
|
|
23. |
Install A-pillar panelling - both sides
• |
Insert A-pillar panelling in guide
|
|
|