|
Replace front seat belt - L68
 Remove
| 1. |
Detach lower B-pillar panelling
| • |
Remove from upper B-pillar panelling
|
|
|
|
| 2. |
Move seat to forwardmost position
|
| 3. |
Detach belt on left outer belt tensioner
Important: Place screwdriver (1)
approx. 10-12 mm below the leading edges of the two locking lugs,
and press through the shear protection
|
| • |
Release clamp
|
|
|
|
| 4. |
Detach upper B-pillar panelling (1)
Note: The belt height
adjuster panel (4) need not be removed.
| • |
Remove upper B-pillar panelling from guide (2)
|
| • |
Unclip upper B-pillar panelling (3)
|
| • |
Thread belt (5) out of upper B-pillar panelling
|
|
|
|
| 5. |
Detach deflection roller
|
| 6. |
Remove automatic belt retractor
|
|
|
Install
| 7. |
Attach automatic belt retractor
|
| 8. |
Attach deflection roller
|
| 9. |
Install upper B-pillar panelling
| • |
Thread belt into upper B-pillar panelling
|
| • |
Clip in upper B-pillar panelling
|
| • |
Insert upper B-pillar panelling in guide
Note: Ensure door
rubber strip sits correctly
|
|
| 10. |
Attach belt on left outer belt tensioner
|
| 11. |
Return seat to original position
|
| 12. |
Attach lower B-pillar panelling
| • |
Insert in upper B-pillar panelling
|
|
|
