Replace trim strip - (rear door)
Remove
1. |
Detach rear door protective trim strip
• |
Carefully prise off protective trim strip with a plastic wedge
(1)
|
|
2. |
Remove remaining glue
• |
Remove the remaining glue from the protective trim strip and
the door with an erasor (2)
Note: Ensure that the
paint is not damaged.
|
|
|
|
Install
|
3. |
Lay on adhesive strips on protection trim strip
Note: Adhesive surface
must be grease and dust free.
|
4. |
Attach rear door protective trim strip
• |
Align and glue on protective trim strip
|
|
5. |
Dimensions
Front clearance
|
Rear clearance
|
Front clearance
|
Horizontal
|
Vertical
|
Vertical
|
I
|
II
|
III
|
160 mm
|
170 mm
|
185 mm
|
|
|
|