Field Remedy: 2532
Subject: |
Gear wheel air distribution - Insufficient
fit |
Models: |
Engines: |
Option: |
Corsa-D 2007... |
All |
Air Conditioning (AC) |
Complaint: |
Click noises when adjusting air
distribution. |
Cause: |
Insufficient fit of gear wheel. |
Production: |
Modified gear wheel has been introduced in
production. |
Remedy:
In case of customer complaint replace gear wheel of manual
air distribution.
Working Procedure:
1. Place rotary switch.
- Switch air distribution to position “Leg room”
2. Remove air duct front leg room – left side.
- Remove clip
- Remove left leg room distributor
3. Mark gear wheel (Picture I, Arrows).
- Apply marking to gear wheels
4. Remove middle gear wheel.
- Unlock snap tab of gear wheel with screwdriver
- Remove gear wheel
5. Check position of rotary switch.
- Rotary switch in position “Leg room”
6. Position shaft of middle gear wheel (Picture II, 1).
- Flattened side of shaft has to be face downwards
7. Install NEW gear wheel (Picture III, right side).
- Use gear with label “DENSO”
- Install and engage gear wheel
- Pay attention to installation position (see Markings picture I)
8. Functional check of air distribution.
9. Install air duct front leg room – left side.
- Install left leg room distributor
- Install clip
Spare-Parts: Part-No.: Catalogue-No.:
Gear Wheel 13334220 90 18 000
Labour Times: TC: Hours:
U3 253 20 Replace gear wheel air 90 0,3
distribution housing
The costs for this repair will be covered during the normal warranty.
The regular warranty procedure will apply.
FunctionalGroup: |
D - Heating/Ventilation/Air
conditioning |
Complaint Group: |
08 - Hard to operate,13 - No/Poor
Function |
Trouble Code: |
None |
|