|
Cooling System, Check for Leaks
Inspect
Warning: The coolant expansion tank
closure cap must not be opened until the engine has cooled
down.
|
| 2. |
Detach coolant expansion tank closure cap
|
| 3. |
Check coolant level
| • |
Top up coolant to COLD mark if necessary
|
|
| 4. |
Attach coolant system tester (1) with KM-471 (3) and KM-6327 (2)
to coolant expansion tank
Note: Follow
manufacturer's instructions.
|
| 5. |
Apply approx. 100 kPa (1 bar) to cooling system
|
|
|
| 6. |
Cooling System, Check for Leaks
|
| 7. |
Detach cooling system tester
| • |
Detach cooling system tester with KM-471 and KM-6327
|
|
| 8. |
Attach coolant expansion tank closure cap
|
|
