|
Bracket for Crankshaft Seal Ring (Rear), Remove
and Install
 Remove
| 2. |
Remove upper part of oil pan 
|
| 3. |
Detach bracket for crankshaft seal ring (1) from cylinder
block
| • |
Separate crankshaft rear seal ring bracket (1) from cylinder
block using a suitable putty knife (3)
|
|
|
|
Install
| 4. |
Clean sealing surfaces.
|
| 5. |
Apply a bead of adhesive sealing compound to sealing surfaces
of crankshaft rear seal ring bracket (arrow)
Note: Select a suitable
sealing compound from the replacement parts catalogue
|
| 6. |
Attach bracket for rear crankshaft seal ring to cylinder
block
| • |
Tighten 5x bolts in the stated order (1 - 5) 10 Nm
|
|
|
|
| 7. |
Install upper part of oil pan
|
|
