vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Engine oil with oil filter change > < Oil Pan, Remove and Install

Corsa D

Oil Dipstick Guide Tube, Remove and Install

  Remove

1.   Open bonnet
2.   Loosen oil dipstick guide tube
•   Place collecting basin underneath.
•   Unscrew bolt (arrow)
Object Number: 2410604 Size: DEFAULT


3.   Remove oil dipstick guide tube
•   Remove oil dipstick

  Install

4.   Insert dipstick guide tube
•   Replace 2 seal rings (1)
5.   Fasten oil dipstick guide tube
•   Tighten bolt
– Tightening torque 8 Nm .
Note:   Remove escaped engine oil using suitable means.
•   Remove collecting pan
6.   Check engine oil level and correct if necessary
7.   Close bonnet
Object Number: 2399415 Size: DEFAULT


Engine oil with oil filter change > < Oil Pan, Remove and Install