vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Ignition module > < Replace coolant temperature sensor

Corsa D

Removing and installing air cleaner housing

  Remove

1.   Open bonnet
2.   Remove air cleaner housing
•   Disconnect mass air flow sensor wiring harness (2)
•   Detach air-flow sensor from air cleaner housing
– Release clamp (1)
•   Detach resonator and water drain line from air cleaner housing
Object Number: 10680133 Size: DEFAULT


  Install

3.   Install air cleaner housing
•   Attach resonator and water drain line to air cleaner housing
•   Attach air flow sensor to air cleaner housing
– Tighten clamp 3.5 Nm
•   Connect mass air flow meter wiring harness plug
4.   Close bonnet

Ignition module > < Replace coolant temperature sensor