Replace pre-heating system control unit
Note: Programming
with TECH 2
Remove
2. |
Remove pre-glow system control unit (1)
• |
Pull pre-heating system control unit out of bracket in
direction of arrow
|
• |
Unclip 2x wiring harness from bracket (2)
|
• |
Disconnect 2x wiring harness plugs (3)
|
|
|
|
Install
3. |
Install pre-glow system control unit
• |
Connect 2x wiring harness plugs
|
• |
Insert pre-heating system control unit into bracket
|
• |
Clip wiring harness into bracket in 2 places
|
|
|