Drive Shaft Assembly with Multi-plate Clutch C2,
Remove and Install (AF13-II)
Remove
3. |
Remove assembly, drive shaft (2) with multi-plate clutch C2,
(3)
• |
Remove upwards out of transmission housing
|
|
4. |
Remove axial needle bearing with friction washer (1) and thrust
washer (4)
|
|
|
Install
5. |
Insert axial needle bearing with friction washer (1) and thrust
washer (4)
|
6. |
Install assembly, drive shaft (2) with multi-plate clutch C2
(3)
• |
Insert into transmission housing from above
|
|
|
|
|