|
Replace fluid cooling lines (AF13-II)
 Remove
| 1. |
Detach 2 fluid cooler lines from transmission
Note: Place collecting
pan underneath.
| • |
Pull off 2 protective rings (3)
|
| • |
Prise off 2 retaining clamps (4)
Note: Prise retaining
clamp from quick-release connection with a small screwdriver
|
| • |
Pull off 2 fluid cooling lines
|
|
| 2. |
Remove 2 fluid cooler lines on the fluid cooler
| • |
Pull off 2 protective rings (2)
|
| • |
Prise off 2 retaining clamps (1)
Note: Prise retaining
clamp from quick-release connection with a small screwdriver
|
| • |
Pull off 2 fluid cooler lines and remove
Note: Note installation
position of fluid cooler lines.
|
|
|
|
Install
| 3. |
Attach 2 fluid cooler lines to the fluid cooler
Note: Use new seal
rings.
| • |
Insert 2 retaining clamps (1)
|
| • |
Insert 2 fluid cooling lines
Note: Ensure that the
fluid cooling lines engage audibly.
|
| • |
Push on 2 protective rings (2)
|
|
| 4. |
Attach 2 fluid cooler lines to transmission
Note: Use new seal
rings.
| • |
Insert 2 retaining clamps (4)
|
| • |
Insert 2 fluid cooling lines
Note: Ensure that the
fluid cooling lines engage audibly.
|
| • |
Push on 2 protective rings (3)
|
|
| 5. |
Transmission Fluid Level, Check and Correct 
|
|
|
|
