Control unit -- replace electronic gear shifting
(AF 13-II)
Note: When replacing
the control unit, before removal, perform "Reset" with TECH 2.
Remove
2. |
Release and disconnect wiring harness plugs (1) and (3) from
transmission control unit (2)
|
|
|
3. |
Press lug (1) outwards and remove transmission control unit
upward.
|
|
|
Install
4. |
Clip transmission control unit into bracket
Note: Lug must audibly
engage.
|
5. |
Connect and lock 2 wiring harness plugs
|
7. |
Program volatile memories
Note: When replacing
the control unit, after installation, "program" with TECH 2.
|
|