vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace electronic control unit (M20 MTA) > < Replace high pressure line - supply unit to shift module (M20 MTA)

Corsa D

Replace sensor for starting speed (M20 MTA)

  Remove

1.   Remove transmission output speed sensor
•   Release wiring harness plug (2) and disconnect
•   Unscrew bolt (1)
•   Remove sensor
Object Number: 10680895 Size: DEFAULT


  Install

2.   Install transmission output speed sensor
•   Replace seal
•   Connect and lock wiring harness plug (2)
•   Tighten bolt (1) 10 Nm
Object Number: 10680895 Size: DEFAULT


Replace electronic control unit (M20 MTA) > < Replace high pressure line - supply unit to shift module (M20 MTA)