|
Replace LPG temperature/pressure sensor (Euro
5)
Warning: When
working on the LPG system, the multivalve shut-off valve must be
closed BY HAND. Work may only be performed by trained personnel.
Faulty installation can lead to fire or explosion, which is a
danger to life and limb.
Important: Observe
safety regulations for gas-driven vehicles (natural gas / Liquefied
Petroleum Gas LPG).
 Remove
| 3. |
Remove LPG temperature/pressure sensor
Note: Residual gas
escapes to the atmosphere when the LPG temperature/pressure sensor
is removed.
| • |
Disconnect wiring harness plug (1)
|
|
|
|
Install
| 4. |
Install LPG temperature/pressure sensor
| • |
Connect wiring harness plug
|
|
| 6. |
Carry out leak test and repair any leaks 
|
|
