Replace side filler unit (Euro 4)
Warning: When
working on the LPG system, the multivalve shut-off valve must be
closed BY HAND. Work may only be performed by trained personnel.
Faulty installation can lead to fire or explosion, which is a
danger to life and limb.
Important: Observe
safety regulations for gas-driven vehicles (natural gas / Liquefied
Petroleum Gas LPG).
Remove
1. |
Remove protective panelling, wheel installation, rear
|
2. |
Detach gas filler valve (1)
• |
Unscrew nut (3) from gas filler valve (1)
|
|
|
|
Install
3. |
Install gas filler valve
• |
Tighten nuts with MKM-6600-1 and
MKM-6600-200
– |
Tightening torque 14 Nm
|
|
|
4. |
Carry out leak test and repair any leaks
|
5. |
Fit protective panelling, wheel installation, rear
|
|