vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replacing the Tail Light -- Right Side L08 > < Glove box lamp

Replacing the Tail Light -- Left Side L08

  Remove

1.   Open service flap.
Object Number: 10679669  Size: DEFAULT

2.   Remove tail light - left side
•   Unscrew 2 screws (1) and (2)
•   Disconnect wiring harness connector (3)
•   Remove tail light

Object Number: 10679670  Size: DEFAULT

3.   Remove lamp holder
•   Release 3 retaining lugs (1), (2) and (3)
•   Remove bulb holder
4.   Remove/replace lamp unit
•   Remove/replace 5x lights

  Install

5.   Install bulb holder
Important:   Ensure correct seat of gaskets.
•   Insert holder
Important:   The retaining lugs must latch audibly.
•   Lock in 3x retaining lug
6.   Install headlamp - left side
•   Fix wiring harness plug
•   Insert tail light
•   Tighten 2x bolts
7.   Close service flap

Replacing the Tail Light -- Right Side L08 > < Glove box lamp