Replacing the Brake Fluid Level Sensor for the
Check Control System -- RHD
Remove
1. |
Remove air cleaner housing
1. |
Z 10 XEP |
2. |
Z 12 XEP, Z 14 XEP |
3. |
Z 13 DTH, Z 13 DTJ |
4. |
Z 17 DTR |
|
2. |
Remove the brake fluid level sensor
• |
Disconnect wiring harness plug (1)
|
• |
Release retaining lug (2)
|
• |
Unclip the brake fluid level sensor and remove
|
|
|
|
Install
3. |
Install the brake fluid level sensor
• |
Clip in the brake fluid level sensor
Note: The sensor must
audibly engage!
|
• |
Fix wiring harness plug
|
|
4. |
Install air cleaner housing
1. |
Z 10 XEP |
2. |
Z 12 XEP, Z 14 XEP |
3. |
Z 13 DTH, Z 13 DTJ |
4. |
Z 17 DTR |
|
|