Vauxhall Workshop Service and Repair Manuals > Corsa D > N Electrical Equipment and Instruments | Servo motors | Repair Instructions | Replacing the Servo Motor for Central Locking

Replacing the Servo Motor for Central Locking - Front Door

1.	Detach door inner panelling L08 L68

Partially detach water vapour barrier (1)

•	Detach bearing bracket (2)

Remove door lock
Note: The servo motor and door lock form a single component

•	Detach linkage

•	Unscrew 3x bolts (1)

•	Remove lock

Install

Install door lock

•	Tighten 3x bolts

•	Attach linkage

Attach water vapour barrier

•	Wet the edge of the water vapour barrier with spray adhesive and bond

•	Install bearing bracket

6.	Install door inner panelling L08 L68

Vauxhall Workshop Service and Repair Manuals