Servo Motor for Central Locking - Tailgate,
Replace
Remove
1. |
Unclip the retention cable of the rear-window shelf on the left
and right
|
2. |
Remove lower tailgate inner panelling
|
3. |
Remove tailgate lock
Note: The lock and
servo motor form a single component
• |
Disconnect wiring harness connector.
|
|
|
|
Install
4. |
Install tailgate lock
• |
Fix wiring harness plug
|
|
5. |
Install lower tailgate inner panelling
|
6. |
Clip in the retention cable of the rear-window shelf on the
left and right
|
|