Replace side airbag wiring harness (OPC)
Important: Replace
or repair wiring harnesses observing the safety regulations of
electrics/electronics.
Remove
|
3. |
Unlock and remove wiring harness at compact plug
• |
Remove wiring harness fixing (1)
|
• |
Open compact plug
– |
Release 4x retaining lugs (2) and (3)
|
|
• |
Disconnect the cable tie (4)
|
• |
Release wiring harness and remove
– |
Release 2x retaining lugs (5)
|
|
|
|
|
4. |
Separate wiring harness at lower seat cushion
|
|
5. |
Detach panelling left front seat backrest
|
6. |
Detach wiring harness (1) for side airbag on front seat
backrest
• |
Release wiring harness plug (2) and disconnect
|
• |
Detach 3x cable tie (arrow)
|
|
|
|
Install
7. |
Attach wiring harness for side airbag to front seat
backrest
• |
Connect wiring harness plug and latch
|
|
8. |
Attach panelling left front seat backrest
|
9. |
Position wiring harness for side airbag
|
10. |
Lay wiring harness at lower seat cushion
|
11. |
Insert wiring harness in compact plug
• |
Insert wiring harness plug
– |
Lock in 2x retaining lug
|
|
• |
Close compact plug
– |
Lock in 4x retaining lug
|
|
|
|