Field Remedy: 2800
Subject: |
High Speed CAN Bus configuration -
Mismatch detected during ECU presence check with Tech2 |
Models: |
Engines: |
Option: |
Corsa-D 2011 |
A17TDS |
Engine A17DTS |
Complaint: |
This issue has no customer impact /
complaint. When carrying out ECU presence check the technician may
notice High Speed CAN BUS mis-match is detected. |
Cause: |
Tech 2 interprets that vehicle is configured
with Automatic Transmission, AFL and Yaw Rate Sensor but the
vehicle does not have these options. Tech 2 software interpretation
error. |
Production: |
|
Remedy:
No action necessary.
Do not attempt to reconfigure/program to overcome the mismatch on
the High Speed CAN Bus or replace any parts.
The apparent wrong configuration is an interpretation problem in
Tech 2 SW which has no impact on the vehicle running or performance.
New Tech 2 software will be released with next TIS update.
FunctionalGroup: |
J - Engine,N - Electrical Equipment |
Complaint Group: |
23 - Wrong Indication |
Trouble Code: |
|
|