Hinge of Tailgate, Replace
Remove
Remove pneumatic spring.
Remove hinge pin.
Partially loosen roof insulation.
1 Hinge pin
2 Retaining ring
3 Hinge pin collar, faces centre of car
Ensure that tailgate does not fall down.
Loosen vehicle roof lining up to hinge.
Unscrew hinge from roof frame with offset screwdriver.
1 Roof plate
2 Roof insulation
3 Vehicle roof lining
Install
In reverse order.
Slightly lubricate hinge pin with high pressure grease.
1 Flat-head screw
2 Plate
3 Roof frame plate
4 Seal
5 Hinge
6 Hinge pin (collar faces car centre)
7 Retaining ring