Crank Drive, Adjust (Operating Unit)

Crank Drive, Adjust

Adjustment of the crank drive is necessary if the crank drive has been detached from the operating unit.

Basic adjustment:     Attach crank handle to drive. Pin points towards front of vehicle.

                                 Turn crank handle clockwise as far as stop. Turn crank handle back 3 full turns to stop position.

If crank handle can not be fully turned, replace crank drive.

1     Pinion

1a   Straight splines (for crank handle)

1b   Slanted splines (for cables)

2     Pin (points towards front of vehicle)