|
Front axle body to underbody.
 Remove
Front axle body – see operation "front axle body
installation and removal" in group "E". Push a medium sized
screwdriver between the locking nut and the side member from below.
Lever the locking nut backwards out of the cage. Use a piece of
bent welding wire to lift the nut out of the square opening in the
mounting unit.
Install
Slide new clamping nut "without
plastic ring" into cage with welding rod. Screw in bolt. Front axle
body.
|
1 and 2
|
Front axle to side member
|
|
3
|
Front axle to radiator crossmember
|
|
