Omega B
Panel - Corrosion
Models: Omega-B 94...
Engines: All
Option:
Group: A - Body
Troublecode: Non
Complaint: Corrosion On vehicles with trailer hitch the side panel will bedeformed on high towed weight.
Cause: Push rod to stiffen side panel in production.
Special part: No
Production Solution:
Remedy: - remove last bolt of compartment lid hinge (A) - install new bolt and fit push rod with spacer bush over the installed bush (B), tighten nut. - to fit push rod to the wheelhous, bore a hole with a diameter of 8, 3 mm (D) - fasten push rod with screw and nut.
Parts required bolt (2) Cat. /Part No. 20 24 408 /(11 098 751) screw (2) Cat. /Part No. 20 02 112 /(11 054 894) nut (4) Cat. /Part No. 03 52 376 /(90 538 686) push rod, left Cat. /Part No. 01 81 906 /(90 563 807) push rod, right Cat. /Part No. 01 81 907 /(90 563 808)
|
||